Frequency |
Frequency range | R&S®FPL1003 | 5 kHz to 3 GHz |
| R&S®FPL1007 | 5 kHz to 7.5 GHz |
Frequency resolution |
| 0.01 Hz |
Bandwidth |
Resolution bandwidth (–3 dB) | sweep filters | 100 kHz to 10 MHz in 1/2/3/5 sequence |
| FFT filters | 1 Hz to 50 kHz in 1/2/3/5 sequence |
Signal analysis bandwidth (equalized) | standard | nom. 10 MHz |
| with R&S®FPL1-B40 option | nom. 40 MHz |
Displayed average noise level (DANL) |
RF preamplifier off | 5 kHz ≤ f < 100 kHz | typ. –143 dBm |
| 100 kHz ≤ f < 5 MHz | < –140 dBm, typ. –143 dBm |
| 5 MHz ≤ f < 3 GHz | < –149 dBm, typ. –152 dBm. |
| 3 GHz ≤ f < 5 GHz | < –143 dBm, typ. –146 dBm |
| 5 GHz ≤ f ≤ 7.5 GHz | < –140 dBm, typ. –143 dBm |
RF preamplifier on (gain nom. 20 dB) | 3 MHz ≤ f < 10 MHz | < –155 dBm, typ. –158 dBm |
| 10 MHz ≤ f < 2 GHz | < –163 dBm, typ. –166 dBm |
| 2 GHz ≤ f < 3 GHz | < –162 dBm, typ. –165 dBm |
| 3 GHz ≤ f < 5 GHz | < –158 dBm, typ. –161 dBm |
| 5 GHz ≤ f < 7 GHz | < –156 dBm, typ. –159 dBm |
| 7 GHz ≤ f < 7.5 GHz | < –155 dBm, typ. –158 dBm |
Attenuation and Gain |
Setting range of attenuator | standard | 0 dB to 45 dB, in 5 dB steps |
| with R&S®FPL1-B25 option | 0 dB to 45 dB, in 1 dB steps |
PRF preamplifier gain | with R&S®FPL1-B22 option | nom. 20 dB |
Intermodulation |
1 dB compression of input mixer (two-tone) | RF attenuation 0 dB, RF preamplifier = off | nom. +7 dBm |
Third-order intercept point (TOI) | RF attenuation 0 dB, level 2 × –20 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = off |
|
| 10 MHz ≤ fin < 300 MHz | > 13 dBm, typ. 16 dBm |
| 300 MHz ≤ fin < 3 GHz | > 17 dBm, typ. 20 dBm |
| 3 GHz ≤ fin ≤ 7.5 GHz | > 15 dBm, typ. 18 dBm |
| with R&S®FPL1-B22 option,
RF attenuation 0 dB, level 2 × –40 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = on |
|
| 5 MHz ≤ fin < 7,5 GHz | nom. 0 dBm |
Phase noise |
SSB phase noise | frequency = 1000 MHz, carrier offset |
|
| 100 Hz | nom. –88 dBc (1 Hz) |
| 1 kHz | < –99 dBc (1 Hz) |
| 10 kHz | < –105 dBc (1 Hz), typ. –108 dBc (1 Hz) |
| 100 kHz | < –110 dBc (1 Hz), typ. –115 dBc (1 Hz) |
| 1 MHz | < –130 dBc (1 Hz), typ. –135 dBc (1 Hz) |
| 10 MHz | nom. –152 dBc (1 Hz) |
Overall Amplitude Accuracy |
Total measurement uncertainty | signal level 0 dB to –50 dB
below reference level, S/N > 20 dB,
sweep time auto, sweep type = FFT,
RF attenuation 10 dB, 20 dB,
30 dB, 40 dB, RF preamplifier = off,
span/RBW < 100, confidence level 95 %,
+20 °C to +30 °C | 0.5 dB |
| 1 MHz ≤ f < 3 GHz | 0.5 dB |
| 3 GHz ≤ f < 7.5 GHz | 0.8 dB |
